THERMOLOCK KF-S 020 A1 Multifunctional interior insulating plaster
Product description
THERMOLOCK KF-S 020 A1 – the multifunctional interior insulating plaster for the highest demands. With its high strength, this plaster not only provides thermal, acoustic and fire protection indoors, but also requires no additional plaster. Available in white or grey, it is characterized by exceptional durability. Due to its water-resistant structure, it does not deform in the event of possible leaks or moisture formation and is also resistant to fungi. As a breathable and non-combustible class A1 plaster, THERMOLOCK KF-S 020 A1 is the perfect solution for economical and effective construction and insulation purposes.
Product details
Type of packaging
20 kg kraft bag
Appearance
White granular powder
Dry density
380 ± 10% (kg/m3)
Thermal conductivity
0.042 (W/mk) T1
Sound insulation
25 dB
Compressive strength
1.67 (N/mm2) CSII
Adhesive strength
0.368 (N/mm2)
Fire resistance
(1000 °C) A1
Drying time until recoatability
48 hours
Durability
16 months
Application temperature range
between +5°C and +35°C
Application method
Machine or steel trowel
Consumption
approx. 4.5 - 5 kg per cm/m2
Description
THERMOLOCK KF-S 020 A1 multifunctional interior insulating plaster is a lightweight, environmentally friendly and high-quality composite insulating plaster developed to insulate and coat the interior walls of buildings with just one product. It consists of a mixture of pumice, perlite, expanded clay and various elements adapted to the building technology. Thermolock offers thermal, acoustic, water and fire insulation as well as various decorative finishes (thick, fine or smooth) without the need for additional products. It is available in white and gray.
Properties
- Equalization
- Thermal insulation
- Sound insulation
- Non-flammable
- Diffusion (breathability)
- Strength
- High adhesive strength
- Easy to use
- Volume
- Economical
- Environmentally friendly (green product)
- Lightness
- National and international quality certificates such as UTO-TSE-CE-ISO-ASTM-LEED-RT
Application purpose
- Minimization of the costs for the required insulation thickness according to the thermal insulation requirements in new or existing buildings.
- Renovation of existing buildings by creating facades in the style of thermal insulation with joints and the possibility of creating a variety of decorative surfaces.
- Direct application to building components such as bricks, aerated concrete, pumice, aerated concrete, raw concrete, etc. in the shell construction phase.
- Reduction of the load on load-bearing elements by eliminating coarse plaster, nets, dowels, panels, etc. through the use of a single product.
- Harmless to health during use, as no carcinogenic residues are released when using fiber products.
- High strength combined with low weight so that decorative surfaces such as stone, marble and granite adhere securely without being affected by the typical weaknesses of insulation products.
- Possibility of using different colors or not painting thanks to the breathable properties of the product; no need for painting due to the water and UV resistance it contains, which results in a long life of the facade without the need for renovation.
- In the event of unforeseen events, both local and extensive renovations can easily be carried out to ensure a healthy and comfortable space in our living spaces with lightweight, environmentally friendly A1 fire protection insulation.
- Quick and easy application both with machines and by hand to reduce labor costs and increase working speed.
- Environmentally friendly insulation according to LEED criteria for green buildings to promote environmental health and fire protection in our living spaces.
POINTS TO NOTE FOR CORRECT APPLICATION:
- When opening the Thermolock package, it should be used completely. It should not be mixed with a shovel, trowel, etc. The plaster should be prepared with a mixer or machine.
- Never use more water than the specified quantity.
- The surface to be treated must be firm, clean, dry and free of dust.
- When working on painted surfaces, these should be scored frequently and prepared with a primer coat.
- Before applying THERMOLOCK, it must be ensured that highly absorbent surfaces are sufficiently dry. If there are pipes or similar in the building, the application must be carried out after their repair.
- The weather conditions must be suitable (+1/+40 degrees Celsius). The product must not be exposed to temperatures below zero during and up to seven hours after application. It is sufficient to protect the product from rain, snow and similar influences for one day.
- If, for any reason, the prepared plaster stands in the bucket or container for a long time and loses its consistency, water should never be added again. The consistency can be restored by mixing again with a slow-running mixer.
- Thermolock KF-S 020 A1 AMultifunctional interior insulating plaster offers thermal, sound and fire protection, but no waterproofing.
Please also note:
- Due to its composition, THERMOLOCK KF-S 020 should be used in its entirety when the package is opened.
- The product must be mixed with a mixer or concrete mixer (at least 6 minutes).
- When mixing Thermolock KF-S 020 multifunctional interior insulating plaster, the specified quantity of water (15 liters) must not be exceeded.
- If for any reason THERMOLOCK KF-S 020- Multifunctional interior insulation plaster has been left in the bucket for a long time and loses its consistency, water should never be added again. The consistency can only be restored by mixing again with a slow-running mixer.
- If THERMOLOCK KF-S 020 multifunctional interior insulating plaster is applied to surfaces with paint, mineral plaster or similar coatings, the surface must be cleaned of about 70% of these materials, for example with a water jet, paint remover or incisions.
HOW IS THERMOLOCK USED?
Preparation of the plaster
One bag of THERMOLOCK KF-S 020 multifunctional interior insulation plaster is emptied into a clean bucket. Approximately 15 liters of water are added and the mortar is mixed for 6-7 minutes using a slow-speed mixer.
Preparation and filling of the surface
The surface to be worked on is cleaned of dust and dirt. It is then aligned to the desired thickness using ano and corner strip profiles, and the gaps between them are filled with previously prepared mortar using a machine or trowel and leveled to complete the first layer.
Completion and finishing
Approximately 4 hours later, THERMOLOCK KF-S 020 is ready for the final coat. In the second coat, THERMOLOCK KF-S 020 is applied in a layer 0.5 cm thick to the already filled surface. Finishing is carried out using suitable tools such as steel spatulas, rubbing boards, rollers, sponges, etc.
Drying time and further processing
After applying THERMOLOCK KF-S 020 multifunctional interior insulating plaster, after 48 hours you can apply a satin finish, paint, stucco or plasterboard as desired.
Convince yourself of the top quality of our products and how simple, economical and high-quality the innovative THERMOLOCK insulating plasters are!
Contact us